Gloss Metallic Amber Brown (RB10-HD)
TeckwrapScandinavia

Gloss Metallic Amber Brown (RB10-HD)

7 438 SEK

Our Gloss Metallic vinyl wrap has a smooth, high-gloss finish and is crafted from the high-grade polymeric multilayered calendared vinyl film, complete with air release channels. Gloss Metallic wrap is durable and has good conformability; it’s stretchable enough to easily wrap around every edge and recessed area of your vehicle. Gloss Metallic also uses a safe solvent polyacrylate adhesive, easy to install, and is gentle on car paint.


Specifications


Conformable polymeric material with stable color pigments. Suitable for full car wrapping (or any other smooth or curved surface).


The thickness of the film(um): 122


The thickness of the release liner(um): 142


Note: Products that have "HD" letters in their SKU (product code) are with the plastic release liner (high-gloss films)


Type of film: High-grade polymeric multilayered calendared vinyl film with air-release channels


Width & Length: Standard roll size - 1.52m*18m (59.8"* 708,6", 4.98ft*59ft, 1.66yd* 19,6yd)


Series: 190 series Adhesive: Henkel solvent-based acrylic


adhesive, transparent, ultra-weather-resistant, viscosity 1000~3000cps, thickness 12 μm dry 001)


Storing period (shelf life): 2 years if stored at +10°C to +20°C, with a relative humidity of 50%, in the original package, away from direct sunlight, clean and dry place


Durability/Warranty: Datasheet (Click the link)


Application: from +17°C to +18°C, usage from -45°C to +45°C


Release force (N/25mm): Standart: 0.10-0.30, Result:0,17 (23℃,54%H)


Initial Tack(g/25mm): Testing method: GB31125-2014: Standart 800-1500, Result: 840 (23℃,54%H)


180° Peel strength (N/25mm): Testing Method: GB/T2792-1998: Standart ≥6.8, Result: 8,7 (23℃,54%H)


Adhesion strength: Testing method: GB/T4851-1998, Standart ≥60, Result 70 (No shifting)


Aging (65℃, seven days): Standart - High-temperature release without adhesive residue, result: no adhesive residue


Aging (-65℃, ten days): Standart - Low-temperature release without adhesive residue, result: no adhesive residue


Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater


Application method: Standard methods for calendered films. No overstretching. Post heating


Post-heating temperature: 100°C


Cure time: 24 hours above 10°C


Aftercare: PH neutral, Avoid wax or solvents


Directional: Yes


Tools: soft squeegees with buffers


The protective cap should be peeled off before installation.


Important note: The screen's images, colors, and finishes are approximate. For the real representation of the product, always check the color swatch. Rolls from the same production LOT number should be used for completing a wrap job, as a slight batch-to-batch variation of color may occur. The film may scratch during the application or a day in and out use. The scratching of the film is not covered by the warranty.

About

TeckWrap Scandinavia, an official distributor of TeckWrap, specializes in pressure-sensitive adhesive wrap films. We are dedicated to providing high-performance vinyl films and wraps for the automotive industry, utilizing the pioneering process developed by TeckWrap itself.

American Express KlarnaMaestroMastercardUnion PayVisa
Copyright © 2024 TeckwrapScandinavia. Powered by Shopify